Categories:ME60 BRAS

ME60 X3 AC

Rated 5.00 out of 5 based on 3 customer ratings

3 Reviews Write a review

PN2355493

AvailabilityIn Stock

WarrantyUp to 36 months

Original price was: $0.00.Current price is: $0.00.

Huawei ME60X3 AC with 1*Chassis, 2*MPUD, 2*AC POWER

Tech Support

Service Commitment

Steps Shipping

Customer Satisfacition

Description

ME60 X3 AC Overview

ME60 series are multiple-service control gateways (BRASs) developed by Huawei for industries such as broadcasting, television, and education. ME60s provide a platform for unified user access and management.

Based on a 2T platform, ME60s provide the industry’s largest-capacity routing line card (480G) and a large-capacity NAT service line card (160G) that enable customers to smoothly evolve from IPv4 to IPv6.

Components of the ME60-X3 AC chassis

. MPU	2. BSU/MSU	3. Cabling rack	4. AC Power module
5. Rack-mounting ear	6. Air intake vent	7. Handle	8. Air filter
9. Ground terminal	10. Fan

Clearances Around the ME60-X3

ME60-X3 air flow path

Allow at least 75 mm (2.95 in.) of clearance around the air intake vent of the ME60-X3, and 1 U of clearances between chassis.

Clearance around the ME60 for heat dissipation

Allow at least 350 mm (13.78 in.) of clearance around the air filter of the ME60-X3 for maintenance.

Clearance around the ME60-X3 for maintenance

ME60 X3 AC Datasheet

Item	ME60 X3 AC
Switching Capacity	1.08 Tbit/s
Forwarding Performance	360 Mbit/s
Number of Slots	5 slots, including 3 LPUs and 2 SRUs
Interface Types	100 GE-WAN/LAN 10 GE-WAN/LAN GE/FE
Processing unit(MHz)	Dominant frequency: 800
BootROM(MB)	2
SDRAM(GB)	4
NVRAM( KB)	512
Flash(MB)	16
CF card(GB)	2
BRAS	User access protocols: PPPoE, IPoE, 802.1X, and ND access User authentication protocols: PAP, CHAP, MSCHAP, RADIUS, and HWTACACS User billing protocols: RADIUS, HWTACACS, and COPS User authorization protocols: RADIUS, HWTACACS, COPS, and COA
L2TP	Maximum number of sessions supported: 64K per slot and 128K per device Maximum number of tunnels supported: 16K per slot, 16K per LAC device, and 48K per LNS device
IPv4	Supports the static routing protocol and dynamic routing protocols, such as RIP, OSPF, IS-IS, and BGP-4. All ports support line-rate forwarding even in complex routing environments, for example, when route flapping occurs
IPv6	IPv4/IPv6 dual stacks A variety of IPv4-to-IPv6 transition technologies: Manually configured tunnels, IPv6 over IPv4 tunnels, GRE tunnels, IPv4 over IPv6 tunnels, and IPv6 Provider Edge (6PE) IPv6 static routes and dynamic routing protocols, such as BGP4/BGP4+, RIPng, OSPFv3, and IS-ISv6 IPv6 neighbor discovery, PMTU discovery, TCP6, ping IPv6, tracert IPv6, socket IPv6, static IPv6 DNS, IPv6 DNS server, TFTP IPv6 client, and IPv6 policy-based routing Network Address Translation IPv6-to-IPv4 (NAT64), NAT44 and Dual-Stack Lite (DS-Lite) Internet Control Message Protocol Version 6 (ICMPv6) Management Information Base (MIB), User Datagram Protocol Version 6 (UDP6) MIB, TCP6 MIB, and IPv6 MIB
MPLS/MPLS VPN	MPLS TE and MPLS/BGP VPN in compliance with RFC 2547bis Inter-AS Option A, inter-AS Option B, and inter-AS Option C Integration with Internet services Martini MPLS L2VPN and Kompella MPLS L2VPN VPLS and VLL Heterogeneous interworking Multicast VPN
Layer 2 Features	Protocols such as IEEE 802.1Q, IEEE 802.1ad, IEEE 802.1D, IEEE 802.1w, and IEEE 802.1s VLAN aggregation (super VLAN) Filtering list based on MAC addresses and ports
Reliability	Protection mechanisms such as IP/LDP/VPN/TE/VLL FRR, IP/TE automatic rerouting, fast convergence of IGP/BGP/multicast routes, VRRP, load balancing among IP-Trunk links, BFD, MPLS/Ethernet OAM, and routing protocol/port/VLAN damping PW redundancy, E-Trunk, E-APS, and E-STP In-service patching for smooth software upgrade Passive backplane Redundancy backup for key components such as route processing modules, SFUs, and power modules to guard against a single point of failure Switching between components that hot back up each other, Graceful Restart (GR), NSF, NSR, and ISSU Hot swapping for all components Intra- or inter-CGN service chassis 1+1 and 1:1 hot backup
QoS	Provides a well-designed HQoS mechanism Provides advanced scheduling and congestion avoidance technologies, accurate traffic policing and traffic shaping, and complex rule definition and fine-grained flow identification Supports MPLS HQoS and ensures QoS for MPLS VPN, VLL, and PWE3 services Supports DiffServ- and MPLS TE-based DS-TE, eight Class Types (CTs), and TE-tunnel-based QoS Supports a maximum of 768K flow queues per slot
Value-added Service	Supports Destination Address Accounting (DAA), which helps carriers identify services based on destination network segments and perform separate accounting for different services on IP bearer networks Supports Enhanced Dynamic Service Gateway (EDSG), which identifies various user services based on traffic destination addresses and implements independent rate limit, accounting, and management for each service
Multicast	IGMP v1, IGMP v2, and IGMP v3 Static multicast Multicast routing protocols, such as PIM-SM, PIM-SSM, MSDP, and MBGP Multicast CAC Interoperability between multicast protocols Multicast policies for multicast routing protocols and multicast forwarding Multicast QoS Two-level multicast replication on the SFU and LPU to achieve optimal multicast service performance
Security	ACL-based packet filtering URPF GTSM DHCP snooping ARP attack defense DoS attack defense MAC address limit MAC-IP binding SSH SSHv2
Maximum Power Consumption(W)	920 (BSUF-100)
Operating Environment	Long-term operating temperature: 0°C to 45°C Short-term operating temperature: –5°C to 55°C Long-term operating humidity: 5% to 85% Short-term operating humidity: 0% to 100% Operating altitude: Equal to or below 4,000m
Dimensions(mm)	220 (H)x 442 (W) x 650 (D)
Empty chassis Weight(kg)	31
Full Configuration Weight(kg)	52 kg (100G)

ME60 X3 AC Datasheet

Item	ME60 X3 AC
Switching Capacity	1.08 Tbit/s
Forwarding Performance	360 Mbit/s
Number of Slots	5 slots, including 3 LPUs and 2 SRUs
Interface Types	100 GE-WAN/LAN 10 GE-WAN/LAN GE/FE
Processing unit(MHz)	Dominant frequency: 800
BootROM(MB)	2
SDRAM(GB)	4
NVRAM( KB)	512
Flash(MB)	16
CF card(GB)	2
BRAS	User access protocols: PPPoE, IPoE, 802.1X, and ND access User authentication protocols: PAP, CHAP, MSCHAP, RADIUS, and HWTACACS User billing protocols: RADIUS, HWTACACS, and COPS User authorization protocols: RADIUS, HWTACACS, COPS, and COA
L2TP	Maximum number of sessions supported: 64K per slot and 128K per device Maximum number of tunnels supported: 16K per slot, 16K per LAC device, and 48K per LNS device
IPv4	Supports the static routing protocol and dynamic routing protocols, such as RIP, OSPF, IS-IS, and BGP-4. All ports support line-rate forwarding even in complex routing environments, for example, when route flapping occurs
IPv6	IPv4/IPv6 dual stacks A variety of IPv4-to-IPv6 transition technologies: Manually configured tunnels, IPv6 over IPv4 tunnels, GRE tunnels, IPv4 over IPv6 tunnels, and IPv6 Provider Edge (6PE) IPv6 static routes and dynamic routing protocols, such as BGP4/BGP4+, RIPng, OSPFv3, and IS-ISv6 IPv6 neighbor discovery, PMTU discovery, TCP6, ping IPv6, tracert IPv6, socket IPv6, static IPv6 DNS, IPv6 DNS server, TFTP IPv6 client, and IPv6 policy-based routing Network Address Translation IPv6-to-IPv4 (NAT64), NAT44 and Dual-Stack Lite (DS-Lite) Internet Control Message Protocol Version 6 (ICMPv6) Management Information Base (MIB), User Datagram Protocol Version 6 (UDP6) MIB, TCP6 MIB, and IPv6 MIB
MPLS/MPLS VPN	MPLS TE and MPLS/BGP VPN in compliance with RFC 2547bis Inter-AS Option A, inter-AS Option B, and inter-AS Option C Integration with Internet services Martini MPLS L2VPN and Kompella MPLS L2VPN VPLS and VLL Heterogeneous interworking Multicast VPN
Layer 2 Features	Protocols such as IEEE 802.1Q, IEEE 802.1ad, IEEE 802.1D, IEEE 802.1w, and IEEE 802.1s VLAN aggregation (super VLAN) Filtering list based on MAC addresses and ports
Reliability	Protection mechanisms such as IP/LDP/VPN/TE/VLL FRR, IP/TE automatic rerouting, fast convergence of IGP/BGP/multicast routes, VRRP, load balancing among IP-Trunk links, BFD, MPLS/Ethernet OAM, and routing protocol/port/VLAN damping PW redundancy, E-Trunk, E-APS, and E-STP In-service patching for smooth software upgrade Passive backplane Redundancy backup for key components such as route processing modules, SFUs, and power modules to guard against a single point of failure Switching between components that hot back up each other, Graceful Restart (GR), NSF, NSR, and ISSU Hot swapping for all components Intra- or inter-CGN service chassis 1+1 and 1:1 hot backup
QoS	Provides a well-designed HQoS mechanism Provides advanced scheduling and congestion avoidance technologies, accurate traffic policing and traffic shaping, and complex rule definition and fine-grained flow identification Supports MPLS HQoS and ensures QoS for MPLS VPN, VLL, and PWE3 services Supports DiffServ- and MPLS TE-based DS-TE, eight Class Types (CTs), and TE-tunnel-based QoS Supports a maximum of 768K flow queues per slot
Value-added Service	Supports Destination Address Accounting (DAA), which helps carriers identify services based on destination network segments and perform separate accounting for different services on IP bearer networks Supports Enhanced Dynamic Service Gateway (EDSG), which identifies various user services based on traffic destination addresses and implements independent rate limit, accounting, and management for each service
Multicast	IGMP v1, IGMP v2, and IGMP v3 Static multicast Multicast routing protocols, such as PIM-SM, PIM-SSM, MSDP, and MBGP Multicast CAC Interoperability between multicast protocols Multicast policies for multicast routing protocols and multicast forwarding Multicast QoS Two-level multicast replication on the SFU and LPU to achieve optimal multicast service performance
Security	ACL-based packet filtering URPF GTSM DHCP snooping ARP attack defense DoS attack defense MAC address limit MAC-IP binding SSH SSHv2
Maximum Power Consumption(W)	920 (BSUF-100)
Operating Environment	Long-term operating temperature: 0°C to 45°C Short-term operating temperature: –5°C to 55°C Long-term operating humidity: 5% to 85% Short-term operating humidity: 0% to 100% Operating altitude: Equal to or below 4,000m
Dimensions(mm)	220 (H)x 442 (W) x 650 (D)
Empty chassis Weight(kg)	31
Full Configuration Weight(kg)	52 kg (100G)

Weight	52.0000 kg
Dimensions	65.0000 × 44.2000 × 22.0000 cm

Huawei Datacenter Switch

ZTE Switch

Cisco Switch

Aruba Switch

H3C Switch

Juniper Swtich

ZTE GPON

FiberHome GPON

Alcatel & Lucent GPON

Huawei Transport Network

OSN 9800 Series

OSN 8800 Series

Selected models

OSN 8800 Series

Up to 6.4 Tbit/s cross-connect capacity

Huawei Router

NE8000 Series

ZTE Router

Juniper Router

Selected models

H3C Router

NE 8000 Series

Designed for the cloud era

ME60 Series

Full service, large capacity, high reliability

Huawei Optical Transceiver

Huawei Embeded Power

ZTE telecom Power

Energy Storage

Emerson Vertiv Power

ME60 X3 AC

Description

ME60 X3 AC Overview

Components of the ME60-X3 AC chassis

Clearances Around the ME60-X3

ME60 X3 AC Datasheet

Additional information

ME60 X3 AC Datasheet

Reviews

Related products

Main Menu

Huawei Datacenter Switch

ZTE Switch

Cisco Switch

Aruba Switch

H3C Switch

Juniper Swtich

ZTE GPON

FiberHome GPON

Alcatel & Lucent GPON

Huawei Transport Network

OSN 9800 Series

OSN 8800 Series

Selected models

OSN 8800 Series

Up to 6.4 Tbit/s cross-connect capacity

Huawei Router

NE8000 Series

ZTE Router

Juniper Router

Selected models

H3C Router

NE 8000 Series

Designed for the cloud era

ME60 Series

Full service, large capacity, high reliability

Huawei Optical Transceiver

Huawei Embeded Power

ZTE telecom Power

Energy Storage

Emerson Vertiv Power

Search For Products

Popular

Up to 6.4 Tbit/s
cross-connect capacity

Full service, large capacity,
high reliability

Up to 6.4 Tbit/s
cross-connect capacity

Full service, large capacity,
high reliability