ETP48200-C2A4

Environment conditions

Operating temperature

–40°C to +65°C

Transportation temperature

–40°C to +70°C

Storage temperature

–40°C to +70°C

Operating humidity

5%–90% RH (non-condensing)

Storage humidity

5%–95% RH (non-condensing)

Altitude

0–4000 m

When the altitude ranges from 2000 m to 4000 m, the operating temperature decreases by 1°C for each additional 200 m.

Other requirements

There is no conductive dust, corrosive gas, or explosion hazard.

Dust, corrosive substances, pests, molds, and other indicators should be controlled in accordance with class 3.1 requirements in ETSI EN 300 019-1-3 (V2.3.2 or a later version).

AC input

Input system

ETP48200-C2A4: 220/380 V AC three-phase four-wire compatible with 220 V AC single-phase

ETP48200-C2A5: 110 V AC dual-live wire compatible with 220 V AC single-phase

Rated voltage

200–240V AC

Voltage range

ETP48200-C2A4: 85–300 V AC single-phase, 147–519V AC three-phase four-wire

ETP48200-C2A5: 85–300 V AC single-phase, 90/180–145/290V AC dual-live wire

Input frequency

45–65 Hz (rated frequency: 50 Hz/60 Hz)

DC output

Output voltage range

–42 V DC to –58 V DC

Default output voltage

–53.5 V DC

Maximum output current

200A

Regulated voltage precision

≤ ±1%

Peak-peak noise voltage

≤ 200 mV

Unbalance of load sharing

≤ ±5% (50%–100% load)

AC input protection

AC input overvoltage protection threshold

> 300 V AC

AC input overvoltage recovery threshold

When the voltage is restored to 290 V AC, the output restores.

AC input undervoltage protection threshold

< 80 V AC

AC input undervoltage recovery threshold

When the voltage is restored to 85 V AC, the output restores.

DC input protection

DC input overvoltage protection threshold

> 420 V DC

DC input overvoltage recovery threshold

When the voltage is restored to 414 V DC, the output restores.

DC output protection

DC output overvoltage protection threshold

Range: 56–60 V DC

EMC specifications

Conducted emission

AC ports: EN 55032 Class B

DC ports: EN 55032 Class A

Signal ports: EN 55032 Class B

Radiated interference

EN 55032 Class B

Harmonic

IEC61000-3-2/12

Fluctuation and flicker

IEC61000-3-3/11

Electrostatic discharge (ESD)

IEC 61000-4-2

Electrical fast transient (EFT)

IEC61000-4-4

Radiated susceptibility (RS)

IEC61000-4-3

Conducted susceptibility (CS)

IEC61000-4-6

Surge susceptibility (Surge)

IEC61000-4-5

Voltage dip (DIP)

IEC61000-4-11

Others

Safety design

Complies with IEC 62368-1/GB 4943 and CE certification.

MTBF

200,000 hours

Structure

H x W x D

87.2mm×482mm×330mm (without mounting ears)

Weight

≤10 kg (excluding rectifiers)

IP rating

IP20

Installation mode

Horizontally and vertically installed in a 19-inch rack

Maintenance mode

Maintained from the front

Heat dissipation mode

Free cooling