Categories:OSN 3500/OSN 7500

SSN3SL16A

0 Reviews Write a review

SKU2014994

BrandsHuawei

AvailabilityIn Stock

MSTP SDH Service Board

WarrantyUp to 36 months

Huawei OSN7500 SSN3SL16A 1xSTM-16 optical interface board

Tech Support

Service Commitment

Steps Shipping

Customer Satisfacition

Description

SSN3SL16A overview

Huawei OSN7500 SSN3SL16A 1xSTM-16 optical interface board. The SL16A is a line board. The SL16A can be used on the OptiX OSN equipment series to transmit and receive STM-16 optical signals. The SL16A converts the received optical signals into electrical signals and sends the electrical signals to the cross-connect side. In addition, the SL16A converts the electrical signals sent from the cross-connect side into optical signals and transmits the optical signals.

Version Description

The SL16A is available in the following functional versions: N3, N2, and N1.

Item	Description
Functional versions	The SL16A is available in the following functional versions: N3, N2, and N1. The N1SL16A and N2SL16A are discontinued.
Differences	Specifications of optical interfaces: DWDM colored optical interfaces. Service processing: AU-3 service processing. REG specifications: REG function. Maintenance features: loopbacks on VC-4 paths and TCM function.
Substitution	The N1SL16A and N2SL16A cannot be substituted with each other. The N3SL16A supports the board version replacement function. The N3SL16A can substitute for the N1SL16A. When the AU-3 services are not configured, the N3SL16A can substitute for the N2SL16A. After the N3SL16A substitutes for the N1SL16A or N2SL16A, the configuration and service status of the N3SL16A are the same as the configuration and service status of the N1SL16A or N2SL16A.

Valid Slots

The SL16A must be installed in a valid slot in the subrack. Otherwise, the SL16A fails to work normally.

The slots valid for the SL16A vary with the cross-connect capacity of the subrack. The slots valid for the SL16A are as follows:

When the cross-connect capacity is 360 Gbit/s, the SL16A can be installed in slots 1–8, 11–18, and 26–31.

Relationship between the feature code of the SL16A and the type of optical interface

Board	Feature Code	Type of Optical Interface
SSN1SL16A01, SSN2SL16A01, SSN3SL16A01	01	I-16
SSN1SL16A02, SSN2SL16A02, SSN3SL16A02	02	S-16.1
SSN1SL16A03, SSN2SL16A03, SSN3SL16A03	03	L-16.1
SSN1SL16A04, SSN2SL16A04, SSN3SL16A04	04	L-16.2
SSN3SL16A06	06	I-16
SSN3SL16A07	07	S-16.1
SSN3SL16A08	08	L-16.1
SSN3SL16A09	09	L-16.2
SSN3SL16A10	10	U-16.2
SSN3SL16A11	11	U-16.2
SSN3SL16A14	14	S-16.1
SSN3SL16A15	15	L-16.1
SSN3SL16A13	13	I-16
SSN3SL16A16	16	L-16.2
SSN3SL16A17	17	U-16.2

Specifications of the ports of the SL16A

Port type	Description
I-16	2 km STM-16 two-fiber bidrectional optical interfaces
S-16.1	15 km STM-16 two-fiber bidrectional optical interfaces
L-16.1	40 km STM-16 two-fiber bidrectional optical interfaces
L-16.2	80 km STM-16 two-fiber bidrectional optical interfaces
U-16.2Je (BA+PA)	170 km STM-16 two-fiber bidrectional optical interfaces NOTE: Only N3SL16A board supports U-16.2Je (BA+PA).

Item	SSN3SL16A
Basic functions	Transmits and receives 1xSTM-16 optical signals.
Specifications of the optical interface	Supports different types of standard optical interfaces, namely, the I-16, S-16.1, L-16.1, and L-16.2. The characteristics of the optical interfaces comply with ITU-T G.957 and ITU-T G.692. The N3SL16A supports U-16.2Je (with the BA and pre-amplifier (PA)). The characteristics of the optical interfaces of the U-16.2Je (with the BA and PA) comply with the standards defined by Huawei. U-16.2Je is compatible with U-16.2. The N3SL16A supports the CWDM and DWDM colored optical interfaces. The optical interface uses the LC connector. The CWDM optical interface supports the transmission distance of 80 km, and the DWDM optical interface supports the transmission distance of 120 km.
Specifications of the optical module	Supports the detection and query of the information about the optical module. Provides the ALS function. The optical interface supports the setting of the on/off state of a laser. Supports the usage and monitoring of the SFP optical module, which facilitates the maintenance and upgrading of the optical module.
Service processing	Supports the VC-12 services, VC-3 services, VC-4 services, VC-4-4c concatenation services, VC-4-8c concatenation services, and VC-4-16c concatenation services. The N2SL16A supports the AU-3 services.
Overhead processing	Processes the section overheads of the STM-16 signals. Supports the transparent transmission and termination of the path overheads. Supports the setting and query of the J0, J1, and C2 bytes. Supports one channel of ECC communication.
Alarms and performance events	Reports various alarms and performance events, which facilitates the management and maintenance of the equipment.
Specifications of the REG	The N2SL16A/N3SL16A board supports the setting and query of the REG working mode. With the REG function enabled, the board is in RS loopback mode and processes only the regeneration section overhead.
Protection schemes	Supports the Two-fiber ring MSP. Supports the Four-fiber ring MSP. Supports the Linear MSP. Supports the SNCP. Supports the SNCMP. Supports the SNCTP. Supports the fiber-shared virtual trail protection. Supports the fiber-shared MSP and processes two sets of K bytes. One SL16A supports a maximum of two MSP rings.
Maintenance features	Supports inloops and outloops at optical interfaces. The N1SL16A supports inloops on VC-4 paths. The N3SL16A board supports inloops and outloops on VC-4 paths. Supports warm resets and cold resets. The warm reset does not affect services. Supports the query of the manufacturing information of the board. Supports the in-service loading of the FPGA. The N2SL16A/N3SL16A board supports the TCM function. Supports the upgrade of the board software without affecting services. Supports the PRBS function. For details, see Availability. Supports the press-to-collect function in fault data collection.

Brand	Huawei
Lead Time	3-5 days
Ship From	Shenzhen Warehouse
MSTP	SDH Service Board

Item	SSN3SL16A
Basic functions	Transmits and receives 1xSTM-16 optical signals.
Specifications of the optical interface	Supports different types of standard optical interfaces, namely, the I-16, S-16.1, L-16.1, and L-16.2. The characteristics of the optical interfaces comply with ITU-T G.957 and ITU-T G.692. The N3SL16A supports U-16.2Je (with the BA and pre-amplifier (PA)). The characteristics of the optical interfaces of the U-16.2Je (with the BA and PA) comply with the standards defined by Huawei. U-16.2Je is compatible with U-16.2. The N3SL16A supports the CWDM and DWDM colored optical interfaces. The optical interface uses the LC connector. The CWDM optical interface supports the transmission distance of 80 km, and the DWDM optical interface supports the transmission distance of 120 km.
Specifications of the optical module	Supports the detection and query of the information about the optical module. Provides the ALS function. The optical interface supports the setting of the on/off state of a laser. Supports the usage and monitoring of the SFP optical module, which facilitates the maintenance and upgrading of the optical module.
Service processing	Supports the VC-12 services, VC-3 services, VC-4 services, VC-4-4c concatenation services, VC-4-8c concatenation services, and VC-4-16c concatenation services. The N2SL16A supports the AU-3 services.
Overhead processing	Processes the section overheads of the STM-16 signals. Supports the transparent transmission and termination of the path overheads. Supports the setting and query of the J0, J1, and C2 bytes. Supports one channel of ECC communication.
Alarms and performance events	Reports various alarms and performance events, which facilitates the management and maintenance of the equipment.
Specifications of the REG	The N2SL16A/N3SL16A board supports the setting and query of the REG working mode. With the REG function enabled, the board is in RS loopback mode and processes only the regeneration section overhead.
Protection schemes	Supports the Two-fiber ring MSP. Supports the Four-fiber ring MSP. Supports the Linear MSP. Supports the SNCP. Supports the SNCMP. Supports the SNCTP. Supports the fiber-shared virtual trail protection. Supports the fiber-shared MSP and processes two sets of K bytes. One SL16A supports a maximum of two MSP rings.
Maintenance features	Supports inloops and outloops at optical interfaces. The N1SL16A supports inloops on VC-4 paths. The N3SL16A board supports inloops and outloops on VC-4 paths. Supports warm resets and cold resets. The warm reset does not affect services. Supports the query of the manufacturing information of the board. Supports the in-service loading of the FPGA. The N2SL16A/N3SL16A board supports the TCM function. Supports the upgrade of the board software without affecting services. Supports the PRBS function. For details, see Availability. Supports the press-to-collect function in fault data collection.

Huawei Datacenter Switch

ZTE Switch

Cisco Switch

Aruba Switch

H3C Switch

Juniper Swtich

ZTE GPON

FiberHome GPON

Alcatel & Lucent GPON

Huawei Transport Network

OSN 9800 Series

OSN 8800 Series

Selected models

OSN 8800 Series

Up to 6.4 Tbit/s cross-connect capacity

Huawei Router

NE8000 Series

ZTE Router

Juniper Router

Selected models

H3C Router

NE 8000 Series

Designed for the cloud era

ME60 Series

Full service, large capacity, high reliability

Huawei Optical Transceiver

Huawei Embeded Power

ZTE telecom Power

Energy Storage

Emerson Vertiv Power

SSN3SL16A

Description

SSN3SL16A overview

Version Description

Item

Description

Valid Slots

Relationship between the feature code of the SL16A and the type of optical interface

Board

Feature Code

Type of Optical Interface

Specifications of the ports of the SL16A

Port type

Description

Item

SSN3SL16A

Additional information

Item

SSN3SL16A

Reviews

Related products

Main Menu

Huawei Datacenter Switch

ZTE Switch

Cisco Switch

Aruba Switch

H3C Switch

Juniper Swtich

ZTE GPON

FiberHome GPON

Alcatel & Lucent GPON

Huawei Transport Network

OSN 9800 Series

OSN 8800 Series

Selected models

OSN 8800 Series

Up to 6.4 Tbit/s cross-connect capacity

Huawei Router

NE8000 Series

ZTE Router

Juniper Router

Selected models

H3C Router

NE 8000 Series

Designed for the cloud era

ME60 Series

Full service, large capacity, high reliability

Huawei Optical Transceiver

Huawei Embeded Power

ZTE telecom Power

Up to 6.4 Tbit/s
cross-connect capacity

Full service, large capacity,
high reliability

Up to 6.4 Tbit/s
cross-connect capacity

Full service, large capacity,
high reliability