Categories:OSN 3500/OSN 7500

SSN1SL16

0 Reviews Write a review

SKU2014966

BrandsHuawei

AvailabilityIn Stock

MSTP SDH Service Board

WarrantyUp to 36 months

Huawei OSN7500 SSN1SL16 1xSTM-16 optical interface board

Tech Support

Service Commitment

Steps Shipping

Customer Satisfacition

Description

SSN1SL16 overview

Huawei OSN7500 SSN1SL16 1xSTM-16 optical interface board. The SL16 can be used on the OptiX OSN equipment series to transmit and receive STM-16 optical signals. The SL16 converts the received optical signals into electrical signals and sends the electrical signals to the cross-connect side. In addition, the SL16 converts the electrical signals sent from the cross-connect side into optical signals and transmits the optical signals.

Valid Slots

The slots valid for the SL16 vary with the cross-connect capacity of the subrack.

The slots valid for the SL16 are as follows:

When the cross-connect capacity is 360 Gbit/s, the SL16 can be installed in slots 1–8, 11–18, and 26–31.

The SL16 is available in three functional versions, namely, N1, N2, and N3. The difference between the three versions is with regard to whether they support the TCM function and AU-3 services.

Item	Description
Functional versions	The SL16 is available in three functional versions, namely, N1, N2, and N3.
Differences	Specifications of optical interfaces: DWDM colored optical interfaces. Service processing: AU-3 service processing. REG specifications: REG function. Maintenance features: loopbacks on VC-4 paths and TCM function.
Substitution	The N1SL16 and N2SL16 cannot be substituted with each other. The N3SL16 supports the board version replacement function. The N3SL16 can substitute for the N1SL16. When the AU-3 services are not required, the N3SL16 can substitute for the N2SL16. After the N3SL16 substitutes for the N1SL16 or N2SL16, the configuration and service status of the N3SL16 are the same as the configuration and service status of the N1SL16 or N2SL16.

Item

Description

Functional versions

The SL16 is available in three functional versions, namely, N1, N2, and N3.

Differences

Specifications of optical interfaces: DWDM colored optical interfaces.
Service processing: AU-3 service processing.
REG specifications: REG function.
Maintenance features: loopbacks on VC-4 paths and TCM function.

Substitution

The N1SL16 and N2SL16 cannot be substituted with each other.

The N3SL16 supports the board version replacement function.

The N3SL16 can substitute for the N1SL16.
When the AU-3 services are not required, the N3SL16 can substitute for the N2SL16.

After the N3SL16 substitutes for the N1SL16 or N2SL16, the configuration and service status of the N3SL16 are the same as the configuration and service status of the N1SL16 or N2SL16.

Relationship between the feature code of the SL16 and the type of optical interface

Board	Feature Code	Type of Optical Interface
SSN1SL1600, SSN3SL1600	00	Fixed-wavelength optical interface
SSN1SL1601, SSN2SL1601, and SSN3SL1601	01	L-16.2
SSN1SL1602, SSN2SL1602, and SSN3SL1602	02	L-16.2Je
SSN1SL1603, SSN2SL1603, and SSN3SL1603	03	V-16.2Je
SSN1SL1604, SSN2SL1604, and SSN3SL1604	04	U-16.2Je
SSN3SL1605	05	L-16.2Je
SSN3SL1606	06	V-16.2Je
SSN3SL1608	08	V-16.2Je
SSN3SL1609	09	L-16.2Je

Specifications of the ports of the SL16

Port type	Description
L-16.2	80 km STM-16 two-fiber bidrectional optical interfaces
L-16.2Je	100 km STM-16 two-fiber bidrectional optical interfaces
V-16.2Je (BA)	140 km STM-16 two-fiber bidrectional optical interfaces
U-16.2Je (BA+PA)	170 km STM-16 two-fiber bidrectional optical interfaces

Item	SSN1SL16
Basic functions	Transmits and receives 1xSTM-16 optical signals.
Specifications of the optical interface	Supports different types of standard optical interfaces, namely, the L-16.2, L-16.2Je, V-16.2Je (with the booster amplifier (BA)), and U-16.2Je (with the BA and pre-amplifier (PA)). The characteristics of the optical interface of the L-16.2 type comply with ITU-T G.957 and ITU-T G.692. The characteristics of the optical interfaces of the L-16.2Je, V-16.2Je (with the BA), and U-16.2Je (with the BA and PA) types comply with the standards defined by Huawei. U-16.2Je is compatible with U-16.2. Supports the output of the standard wavelengths that comply with ITU-T G.692. The U-16.2Je optical interface can be directly connected to the dense wavelength division multiplexing (DWDM) equipment. The N3SL16 supports DWDM colored optical interfaces, which use LC connectors and support the transmission distances of 170 km and 640 km.
Specifications of the optical module	Supports the detection and query of the information about the optical module. Provides the ALS function. The optical interface supports the setting of the on/off state of a laser.
Service processing	Supports the VC-12 services, VC-3 services, VC-4 services, VC-4-4c concatenation services, VC-4-8c concatenation services, and VC-4-16c concatenation services. The N2SL16 supports the AU-3 services.
Overhead processing	Processes the section overheads of the STM-16 signals. Supports the transparent transmission and termination of the path overheads. Supports the setting and query of the J0, J1, and C2 bytes. Supports one channel of ECC communication.
Alarms and performance events	Reports various alarms and performance events, which facilitates the management and maintenance of the equipment.
Specifications of the REG	The N2SL16/N3SL16 board supports the setting and query of the REG working mode. With the REG function enabled, the board is in RS loopback mode and processes only the regeneration section overhead.
Protection schemes	Supports the tTwo-fiber ring MSP, Four-fiber ring MSP, Linear MSP, SNCP, SNCMP, and SNCTP. Supports the fiber-shared MSP and SNCP and processes two sets of K bytes. One SL16 supports a maximum of two MSP protection rings.
Maintenance features	Supports inloops and outloops at optical interfaces. The N1SL16 supports inloops on VC-4 paths. The N3SL16 board supports inloops and outloops on paths. Supports warm resets and cold resets. The warm reset does not affect services. Supports the query of the manufacturing information of the board. Supports the in-service loading of the FPGA. The N2SL16 and N3SL16 support the TCM function. Supports the upgrade of the board software without affecting services. The N2SL16/N3SL16 board supports the TCM function. Supports the PRBS function. For details, see Availability. Supports the press-to-collect function in fault data collection.

Brand	Huawei
Lead Time	3-5 days
Ship From	Shenzhen Warehouse
MSTP	SDH Service Board

Item	SSN1SL16
Basic functions	Transmits and receives 1xSTM-16 optical signals.
Specifications of the optical interface	Supports different types of standard optical interfaces, namely, the L-16.2, L-16.2Je, V-16.2Je (with the booster amplifier (BA)), and U-16.2Je (with the BA and pre-amplifier (PA)). The characteristics of the optical interface of the L-16.2 type comply with ITU-T G.957 and ITU-T G.692. The characteristics of the optical interfaces of the L-16.2Je, V-16.2Je (with the BA), and U-16.2Je (with the BA and PA) types comply with the standards defined by Huawei. U-16.2Je is compatible with U-16.2. Supports the output of the standard wavelengths that comply with ITU-T G.692. The U-16.2Je optical interface can be directly connected to the dense wavelength division multiplexing (DWDM) equipment. The N3SL16 supports DWDM colored optical interfaces, which use LC connectors and support the transmission distances of 170 km and 640 km.
Specifications of the optical module	Supports the detection and query of the information about the optical module. Provides the ALS function. The optical interface supports the setting of the on/off state of a laser.
Service processing	Supports the VC-12 services, VC-3 services, VC-4 services, VC-4-4c concatenation services, VC-4-8c concatenation services, and VC-4-16c concatenation services. The N2SL16 supports the AU-3 services.
Overhead processing	Processes the section overheads of the STM-16 signals. Supports the transparent transmission and termination of the path overheads. Supports the setting and query of the J0, J1, and C2 bytes. Supports one channel of ECC communication.
Alarms and performance events	Reports various alarms and performance events, which facilitates the management and maintenance of the equipment.
Specifications of the REG	The N2SL16/N3SL16 board supports the setting and query of the REG working mode. With the REG function enabled, the board is in RS loopback mode and processes only the regeneration section overhead.
Protection schemes	Supports the tTwo-fiber ring MSP, Four-fiber ring MSP, Linear MSP, SNCP, SNCMP, and SNCTP. Supports the fiber-shared MSP and SNCP and processes two sets of K bytes. One SL16 supports a maximum of two MSP protection rings.
Maintenance features	Supports inloops and outloops at optical interfaces. The N1SL16 supports inloops on VC-4 paths. The N3SL16 board supports inloops and outloops on paths. Supports warm resets and cold resets. The warm reset does not affect services. Supports the query of the manufacturing information of the board. Supports the in-service loading of the FPGA. The N2SL16 and N3SL16 support the TCM function. Supports the upgrade of the board software without affecting services. The N2SL16/N3SL16 board supports the TCM function. Supports the PRBS function. For details, see Availability. Supports the press-to-collect function in fault data collection.

Huawei Datacenter Switch

ZTE Switch

Cisco Switch

Aruba Switch

H3C Switch

Juniper Swtich

ZTE GPON

FiberHome GPON

Alcatel & Lucent GPON

Huawei Transport Network

OSN 9800 Series

OSN 8800 Series

Selected models

OSN 8800 Series

Up to 6.4 Tbit/s cross-connect capacity

Huawei Router

NE8000 Series

ZTE Router

Juniper Router

Selected models

H3C Router

NE 8000 Series

Designed for the cloud era

ME60 Series

Full service, large capacity, high reliability

Huawei Optical Transceiver

Huawei Embeded Power

ZTE telecom Power

Energy Storage

Emerson Vertiv Power

SSN1SL16

Description

SSN1SL16 overview

Valid Slots

Item

Description

Relationship between the feature code of the SL16 and the type of optical interface

Board

Feature Code

Type of Optical Interface

Specifications of the ports of the SL16

Port type

Description

Item

SSN1SL16

Additional information

Item

SSN1SL16

Reviews

Related products

Main Menu

Huawei Datacenter Switch

ZTE Switch

Cisco Switch

Aruba Switch

H3C Switch

Juniper Swtich

ZTE GPON

FiberHome GPON

Alcatel & Lucent GPON

Huawei Transport Network

OSN 9800 Series

OSN 8800 Series

Selected models

OSN 8800 Series

Up to 6.4 Tbit/s cross-connect capacity

Huawei Router

NE8000 Series

ZTE Router

Juniper Router

Selected models

H3C Router

NE 8000 Series

Designed for the cloud era

ME60 Series

Full service, large capacity, high reliability

Huawei Optical Transceiver

Huawei Embeded Power

ZTE telecom Power

Energy Storage

Up to 6.4 Tbit/s
cross-connect capacity

Full service, large capacity,
high reliability

Up to 6.4 Tbit/s
cross-connect capacity

Full service, large capacity,
high reliability