Issue Description
The ONT reports an alarm indicating that the Ethernet port is not connected to the ONT on the MA5680T.
Solution
In the default ONT alarm policy template, enable the “ONT Ethernet port signal loss”.
MA5680T(config)#ont-alarm-policy policy-id 0 MA5680T(config-ont-alarm-policy-0)#undo alarm filter 0x2e313024 Remarks: If an ONT is online, the ONT needs to be reset after the ONT is reset. MA5680T(config-if-epon-0/1)#display ont alarm-state 7 0 --------------------------------------------------------------------- Subrack/Slot/Port: 0/1/7 --------------------------------------------------------------------- ONT ID: 0 To activate the alarm information: (1) ONT Ethernet port signal loss (Ethernet port number: 1) (2)ONT Ethernet port signal loss (Ethernet port number: 2) (3)ONT Ethernet port signal loss (Ethernet port number: 3) (4)ONT Ethernet port signal loss (Ethernet port number: 4)
Leave a comment