HUAWEI NetEngine40E Universal Service Routers (NE40E for short) are Huawei high-end network products. Here, we would like to take a brief introduction about NE40E and do comparison of NE40E models.
NetEngine 40E Series
Based on a 2T platform, equipped with NP chipsets, and powered by its Versatile Routing Platform (VRP), the NetEngine 40E series provides the industry’s highest capacity 2T routing line cards. Combining performance with low power consumption, innovative Internet Protocol (IP) hard pipe technology, and quick evolution capabilities, NetEngine 40E routers meet the low latency and high reliability requirements of business-critical services as well as mature Wide Area Network (WAN) Software-Defined Networking (SDN) solutions. They can serve as core nodes on enterprise WANs, access nodes on large-scale enterprise networks, interconnection and aggregation nodes on campus networks, and edge nodes on large-scale Internet Data Center (IDC) networks.
NetEngine 40E is an award-winning series widely adopted by governments and industries, including electric power, transportation, broadcasting and television, and finance.
See below datasheet:
| Product name | NE40E-X3 | NE40E-X3A | NE40E-X8 | NE40E-X8A |
| Forwarding performance | 105 Mpps (LPUF-51) 360 Mpps (LPUF-120) |
900 Mpps (LPUF-200) | 2880 Mpps (LPUF-240) | 2880 Mpps (LPUF-240) |
| Switching capacity | 1.08 Tbps | 2.76 Tbps | 7.08 Tbps (LPUF-240/LPUI-240) | 25.16 Tbps (LPUI-1T) 51.2 Tbps (LPUI-2T) |
| Operating temperature | Long-term: 0 °C to 45 °C (32°F to 113°F) Short-term: -5 °C to 55 °C (23°F to 131°F) Remark: Restriction on the temperature variation rate: 30°C/hour (86°F/h) |
Long-term: 0 °C to 45 °C (32°F to 113°F) Short-term: -5 °C to 55 °C (23°F to 131°F) Remark: Restriction on the temperature variation rate: 30°C/hour (86°F/h) |
Long-term: 0 °C to 45 °C (32°F to 113°F) Short-term: -5 °C to 55 °C (23°F to 131°F) Remark: Restriction on the temperature variation rate: 30°C/hour (86°F/h) |
Long-term: 0 °C to 45 °C (32°F to 113°F) Short-term: -5 °C to 55 °C (23°F to 131°F) Remark: Restriction on the temperature variation rate: 30°C/hour (86°F/h) |
| Relative operating humidity | 5% to 95% RH, non-condensing | 5% to 95% RH, non-condensing | 5% to 95% RH, non-condensing | 5% to 95% RH, non-condensing |
| Long-term operating altitude | <= 4000 m (13123.2 ft.) (For the altitude in the range of 1800 m to 4000 m [5905.44 ft. to 13123.2 ft.], the operating temperature of the NEU100 must decrease by 1°C [33.8°F] for every 220 m [721.78 ft.].) | <= 4000 m (13123.2 ft.) (For the altitude in the range of 1800 m to 4000 m [5905.44 ft. to 13123.2 ft.], the operating temperature of the NEU100 must decrease by 1°C [33.8°F] for every 220 m [721.78 ft.].) | <= 4000 m (13123.2 ft.) (For the altitude in the range of 1800 m to 4000 m [5905.44 ft. to 13123.2 ft.], the operating temperature of the NEU100 must decrease by 1°C [33.8°F] for every 220 m [721.78 ft.].) | <= 4000 m (13123.2 ft.) (For the altitude in the range of 1800 m to 4000 m [5905.44 ft. to 13123.2 ft.], the operating temperature of the NEU100 must decrease by 1°C [33.8°F] for every 220 m [721.78 ft.].) |
| Storage altitude | Lower than 5000 m (16404 ft) | Lower than 5000 m (16404 ft) | Lower than 5000 m (16404 ft) | Lower than 5000 m (16404 ft) |
| Storage Environment | ||||
| Storage temperature | -40 °C to 70 °C (-40°F to 158°F) | -40 °C to 70 °C (-40°F to 158°F) | -40 °C to 70 °C (-40°F to 158°F) | -40 °C to 70 °C (-40°F to 158°F) |
| Relative storage humidity | 5% RH to 95% RH, non-condensing | 5% RH to 95% RH, non-condensing | 5% RH to 95% RH, non-condensing | 5% RH to 95% RH, non-condensing |
| Compatibility | ||||
| Main Processing Unit | Main Processing Unit D2(Including 2G Memory and 2G USB) Main Processing Unit D3(Including 4G Memory and 2G USB) |
Main Processing Unit D4 Main Processing Unit D4(16G Memory) |
Switch and Route Processing Unit A5 Switch and Route Processing Unit A7 Switch and Route Processing Unit B5 Switch and Route Processing Unit A12 |
Switch and Route Processing Unit A8 Switch and Route Processing Unit A8(16G Memory) Switch and Route Processing Unit A9 Switch and Route Processing Unit A9(16G Memory) Switch and Route Processing Unit A10(32G Memory) Switch and Route Processing Unit A16 Switch and Route Processing Unit A15 Switch and Route Processing Unit A161 Switch and Route Processing Unit A13(32G Memory) Switch and Route Processing Unit A14(32G Memory) |
| Switch Fabric Unit | NA | NA | 100Gbps Switch Fabric Unit D(SFUI-100-D)/p> 200Gbps Switch Fabric Unit C(SFUI-200-C) 400Gbps Switch Fabric Unit F (SFUI-400-F) |
480Gbps Switch Fabric Unit C(SFUI-480-C) 1Tbps Switch Fabric Unit C(SFUI-1T-C) 480Gbps Switch Fabric Unit C(SFUI-480-C) 2Tbps Switch Fabric Unit D(SFUI-2T-D) 2Tbps Switch Fabric Unit F(SFUI-2T-F) 1Tbps Switch Fabric Unit F1(SFUI-1T-F) 2Tbps Switch Fabric Unit F1(SFUI-2T-F) 2Tbps Switch Fabric Unit H(SFUI-2T-H) 1Tbps Switch Fabric Unit H(SFUI-1T-H) |
| Physical Parameter | ||||
| Dimensions (H x W x D) | DC: (4 U) 175 mm x 442 mm x 650 mm (6.89 in. x 17.40 in. x 25.59 in.) AC: (5 U) 220 mm x 442 mm x 650 mm (8.66 in. x 17.40 in. x 25.59 in.) |
(6 U) 264 mm x 442 mm x 710 mm (10.39 in. x 17.40 in. x 27.95 in.) (Chassis main body) DC: (6 U) 264 mm x 442 mm x 758 mm (10.39 in. x 17.40 in. x 29.84 in.) (Dimensions of the chassis body together with cable trays and front and back attachments) AC: (6 U) 264 mm x 442 mm x 770 mm (10.39 in. x 17.40 in. x 30.31 in.) (Dimensions of the chassis body together with cable trays and front and back attachments) |
(14 U) 620 mm x 442 mm x 650 mm (24.41 in. x 17.40 in. x 25.59 in.)(Chassis main body) (14 U) 620 mm x 442 mm x 770 mm (24.41 in. x 17.40 in. x 30.31 in.)(Dimensions of the chassis body together with cable trays and front and back attachments) |
(21 U) 930 mm x 442 mm x 650 mm (36.61 in. x 17.40 in. x 25.59 in.) (Chassis main body) (21 U) 930 mm x 442 mm x 750 mm (36.61 in. x 17.40 in. x 29.53 in.) (Dimensions of the chassis body together with cable trays and front and back attachments) [2T bundle](21 U) 930 mm x 442 mm x 941 mm (36.61 in. x 17.40 in. x 37.05 in.) (Dimensions of the chassis body together with cable trays and front and back attachments and noise reduction module) |
| Weight (empty) | DC: 12 kg (26.46 lb) AC: 20 kg (44.1 lb) |
25.8 kg (56.89 lb) (without filler panels) | DC: 68.1 kg (150.16 lb) (without filler panels) HVDC&AC: 63.7 kg (140.46 lb) (without filler panels) |
|
| Weight (full configuration) | DC: 42 kg (92.61 lb) AC: 52 kg (114.66 lb) |
DC: 72.1kg AC: 74.7kg |
136 kg (299.88 lb) | [1T bundle] DC:209 kg (460.85 lb) [1T bundle]HVDC&AC:206.5 kg (455.33 lb) [2T bundle]DC:242kg (533.51 lb) [2T bundle]AC&HVDC:234.4kg(516.76 lb) |
| Cabinet installation standard | Can be installed in a standard 19″ 800 mm-deep cabinet. A Huawei 2.2 m-high N68E cabinet is used by default. | Can be installed in a standard 19″ 800 mm-deep cabinet. A Huawei 2.2 m-high N68E cabinet is used by default. | Can be installed in a standard 19″ 800 mm-deep cabinet. A Huawei 2.2 m-high N68E cabinet is used by default. | Can be installed in a standard 19″ 800 mm-deep cabinet. A Huawei 2.2 m-high N68E cabinet is used by default. [2T bundle]Can be installed in a standard 19″ 1000 mm-deep cabinet,part number is 02115109(CR5B0N610E60) |
| Typical power consumption | DC: 800 W (fully configured with LPUF-51s) AC: 950 W (fully configured with LPUF-51s) DC: 920 W (fully configured with LPUF-120s) AC: 1070 W (fully configured with LPUF-120s) |
1120 W (fully configured with LPUF-200s) | 3220 W (fully configured with LPUF-240s) | 4110 W (fully configured with LPUF-240s) 4770 W (fully configured with LPUF-480s) 6520 W (fully configured with LPUI-1Ts) 11100 W (fully configured with LPUI-2Ts) |
| Typical heat dissipation | DC: 2595.5 BTU/hour (fully configured with LPUF-51s) AC: 3082.2 BTU/hour (fully configured with LPUF-51s) DC: 2984.9 BTU/hour (fully configured with LPUF-120s) AC: 3471.5 BTU/hour (fully configured with LPUF-120s) |
3633.8 BTU/hour (fully configured with LPUF-200s) | 10447 BTU/hour (fully configured with LPUF-240s) | 13334.6 BTU/hour (fully configured with LPUF-240s) 15475.9 BTU/hour (fully configured with LPUF-480s) 21153.6 BTU/hour (fully configured with LPUI-1Ts) 36013.1 BTU/hour (fully configured with LPUI-2Ts) |
| DC input voltage | input voltage range: -38.4 to -72V input rated voltage: -48V/-60V |
input voltage range: -40 to -72V input rated voltage: -48V/-60V |
input voltage range: -38.4 to -72V input rated voltage: -48V/-60V |
input voltage range: -40 to -72V input rated voltage: -48V/-60V |
| AC input voltage | input voltage range: 180V to 264V input rated voltage: 200V to 240V |
input voltage range: 180V to 264V input rated voltage: 200V to 240V |
input voltage range: 180V to 264V input rated voltage: 200V to 240V |
input voltage range: 180V to 264V input rated voltage: 200V to 240V |
| HVDC input voltage | NA | input voltage range: 192 to 288VDC input rated voltage: 240 VDC |
NA | input voltage range: 192 to 288V,264 to 400V input rated voltage: 240 V/380 V |
| Reliability | ||||
| MTBF | 27.44 years | 22.85 years | 21.91 years | 22.32 years |
| MTTR | 0.5 hour | 0.5 hour | 0.5 hour | 0.5 hour |
| Availability | 0.99999792 | 0.999997502 | 0.999997395 | 0.999997443 |
| Device Capability | ||||
| Slot quantity | 5 | 5 | 11 | 12 |
| Processing unit | Main Processing Unit D2(Including 2G Memory and 2G USB): Single-core 1.2GHZ Main Processing Unit D3(Including 4G Memory and 2G USB): Single-core 1.2GHZ |
Main Processing Unit D4: Quad-core 2.0GHz Main Processing Unit D4(16G Memory): Quad-core 2.0GHz |
Switch and Route Processing Unit A5: Dual-core 1.5GHz Switch and Route Processing Unit A7: Dual-core 1.5GHz Switch and Route Processing Unit B5: Dual-core 2.0GHz Switch and Route Processing Unit A12: 16-core 2.0GHz |
Switch and Route Processing Unit A8: Quad-core 2.0GHz Switch and Route Processing Unit A8(16G Memory): Quad-core 2.0GHz Switch and Route Processing Unit A9: Quad-core 2.0GHz Switch and Route Processing Unit A9(16G Memory): Quad-core 2.0GHz Switch and Route Processing Unit A10(32G Memory): Octa-core 2.3GHZ Switch and Route Processing Unit A16: 16-core 2.0GHz Switch and Route Processing Unit A15: 16-core 2.0GHz Switch and Route Processing Unit A161: 16-core 2.0GHz Switch and Route Processing Unit A13(32G Memory): 24-core 2.3GHz Switch and Route Processing Unit A14(32G Memory): 24-core 2.3GHz |
| Flash | Main Processing Unit D2(Including 2G Memory and 2G USB): 16 MB Main Processing Unit D3(Including 4G Memory and 2G USB): 16 MB |
Main Processing Unit D4: 16 MB Main Processing Unit D4(16G Memory): 16 MB |
Switch and Route Processing Unit A5: 16 MB x 2 Switch and Route Processing Unit A7: 16 MB x 2 Switch and Route Processing Unit B5: 16 MB Switch and Route Processing Unit A12: 64 MB |
Switch and Route Processing Unit A8: 16 MB Switch and Route Processing Unit A8(16G Memory): 16 MB Switch and Route Processing Unit A9: 16 MB Switch and Route Processing Unit A9(16G Memory): 16 MB Switch and Route Processing Unit A10(32G Memory): 16 MB Switch and Route Processing Unit A16: 64 MB Switch and Route Processing Unit A15: 64 MB Switch and Route Processing Unit A161: 64 MB Switch and Route Processing Unit A13(32G Memory): 64 MB Switch and Route Processing Unit A14(32G Memory): 64 MB |
| SDRAM | Main Processing Unit D2(Including 2G Memory and 2G USB): 2 GB(9*2Gb) Main Processing Unit D3(Including 4G Memory and 2G USB): 4 GB(9*4Gb) |
Main Processing Unit D4: 8 GB x 1 Main Processing Unit D4(16G Memory): 8 GB x 2 |
Switch and Route Processing Unit A5: 2 GB x 2 Switch and Route Processing Unit A7: 2 GB x 2 Switch and Route Processing Unit B5: 8 GB x 2 Switch and Route Processing Unit A12: 32 GB |
Switch and Route Processing Unit A8: 8 GB x 1 Switch and Route Processing Unit A8(16G Memory): 8 GB x 2 Switch and Route Processing Unit A9: 8 GB x 1 Switch and Route Processing Unit A9(16G Memory): 8 GB x 2 Switch and Route Processing Unit A10(32G Memory): 32 GB Switch and Route Processing Unit A16: 32 GB Switch and Route Processing Unit A15: 32 GB Switch and Route Processing Unit A161: 32 GB Switch and Route Processing Unit A13(32G Memory): 32 GB Switch and Route Processing Unit A14(32G Memory): 32 GB |
| Storage | Main Processing Unit D2(Including 2G Memory and 2G USB): eUSB:2 GB Main Processing Unit D3(Including 4G Memory and 2G USB): eUSB:2 GB |
Main Processing Unit D4: SSD card:8 GB Main Processing Unit D4(16G Memory): SSD card:8 GB |
Switch and Route Processing Unit A5: CF card:4 GB (2GB x2) Switch and Route Processing Unit A7: CF card:4 GB (2GB x2) Switch and Route Processing Unit B5: SSD card:8 GB Switch and Route Processing Unit A12: SATA card:8 GB |
Switch and Route Processing Unit A8: SSD card:8 GB Switch and Route Processing Unit A8(16G Memory): SSD card:8 GB Switch and Route Processing Unit A9: SSD card:8 GB Switch and Route Processing Unit A9(16G Memory): SSD card:8 GB Switch and Route Processing Unit A10(32G Memory): SSD card:8 GB Switch and Route Processing Unit A16: SSD card:8 GB Switch and Route Processing Unit A15: SSD card:8 GB Switch and Route Processing Unit A161: SSD card:8 GB Switch and Route Processing Unit A13(32G Memory): SATA card:32 GB Switch and Route Processing Unit A14(32G Memory): SATA card:32 GB |
| Redundant MPUs | 1+1 | 1:1 | 1:1 | 1:1 |
| Redundant Switch fabrics | NA | NA | 2+1 | 3+1 |
| Redundant NPUs | NA | NA | NA | NA |
| Redundant fans | Support for proper fan operation in case of a single fan failure for a short period at 40°C (104°F) | Support for proper fan operation in case of a single fan failure for a short period at 40°C (104°F) | 2 assemblies Support for proper fan operation in case of a single fan failure for a short period at 40°C (104°F) |
[1T bundle] 3 assemblies in support for proper fan operation in case of a single fan failure for a short period at 40°C (104°F) [2T bundle] 3 assemblies in support for proper fan operation in case of a single fan failure for a short period at 40°C (104°F) |
| Redundant power supply | 1+1 | 1+1 | 2+2 | [1T bundle] DC: 5+1 [1T bundle] HVDC&AC: 4+1 [2T bundle] DC: 7+1 [2T bundle] HVDC&AC: 5+1 |
NMS U2000
The NE40E is managed by the Huawei iManager U2000 unified network management system (U2000). With an industry-leading flexible architecture, the U2000 provides rich and unified northbound interfaces (NBIs). U2000 supports multiple operating systems and provides multilingual graphical user interfaces (GUIs), such as the topology view, panel view, and terminal management view. You can use the U2000 to manage Huawei transport devices (such as WDM devices), access devices (such as DSLAM devices), and IP devices (such as routers and switches) in a centralized manner.
U2000 uses SNMP or NETCONF to communicate with the NE40E for management and maintenance.
U2000 allows you to:
- Manage distributed network devices in a centralized manner and deploy services in batches, reducing operation costs.
- Analyze network operating status and service bottlenecks so that network resources can be appropriately planned and allocated based on collected network performance statistics.
- Monitor, forecast, and detect network faults to improve network reliability and service quality.
From all above, the main difference of NE series models are forwarding performance and switching capacity, different services slots. Considering all the details information and to get the latest news, please feel free to contact csd@telecomate.com, which will provide professional help for you.
Leave a comment