.svg)
.svg)
Description
ME0D0LMXFA70 Overview
8-Port 100GBase-CFP2 Multi Service Unit Integrated(MSUI-1T)
Mapping products and versions
| Product | Minimum Version Requirement for Flexible Card |
| ME60–X8A | V800R009C00 |
| ME60–X16A | V800R009C00 |
ME0D0L8NCA70
AvailabilityIn Stock
ME60 BRAS
BSUF-1T/MSUF-1T/MSUI-1T
WarrantyUp to 36 months
Original price was: $0.00.Current price is: $0.00.
8-Port 100GBase-CFP2 Multi Service Unit Integrated(MSUI-1T)
ME0D0L8NCA70 Datasheet
| Item | ME0D0L8NCA70 |
| Line-Rate capability | Supports 1T line-rate forwarding, it supports eight 100G interfaces for line-rate forwarding. |
| Reliability and availability | Hot swappable. |
| Whether breakout is supported |
Yes To enable breakout interfaces, run the port split command to complete breakout configuration. |
| Restrictions and remarks |
All the ten 10GE interfaces split from one interface must work in the same LAN or WAN mode(The 10G interfaces working in WAN mode can function only as master interfaces). |
| Optical type supported |
100Gbps CFP2 optical module
NOTE:
When optical modules with the BOM number 02311LYG are used, 2x40G breakout optical fibers are not supported. Modules with the BOM number 02312AXE are not supported |
| Working mode | Full-duplex |
| Compliant standard | IEEE 802.3 |
| Frame format | Ethernet_II, Ethernet_SAP and Ethernet_SNAP |
| Dimensions (H x W x D) | 40.1 mm x 399.2 mm x 535.6 mm (1.58 in. x 15.72 in. x 21.09 in.) |
| Typical power consumption | 584.5 W |
| Typical heat dissipation | 1896.4 BTU/hour |
| Weight | 11.0 kg (24.26 lb) |
| Ambient temperature | Long terms: 0 °C to 45 °C (32°F to 113°F) ; Short terms: -5 °C to 55 °C (23°F to 131°F) |
Additional information
| Weight | 1.7000 kg |
|---|---|
| Dimensions | 36.5000 × 31.0000 × 10.0000 cm |
| ME60 BRAS |
ME0D0L8NCA70 Datasheet
| Item | ME0D0L8NCA70 |
| Line-Rate capability | Supports 1T line-rate forwarding, it supports eight 100G interfaces for line-rate forwarding. |
| Reliability and availability | Hot swappable. |
| Whether breakout is supported |
Yes To enable breakout interfaces, run the port split command to complete breakout configuration. |
| Restrictions and remarks |
All the ten 10GE interfaces split from one interface must work in the same LAN or WAN mode(The 10G interfaces working in WAN mode can function only as master interfaces). |
| Optical type supported |
100Gbps CFP2 optical module
NOTE:
When optical modules with the BOM number 02311LYG are used, 2x40G breakout optical fibers are not supported. Modules with the BOM number 02312AXE are not supported |
| Working mode | Full-duplex |
| Compliant standard | IEEE 802.3 |
| Frame format | Ethernet_II, Ethernet_SAP and Ethernet_SNAP |
| Dimensions (H x W x D) | 40.1 mm x 399.2 mm x 535.6 mm (1.58 in. x 15.72 in. x 21.09 in.) |
| Typical power consumption | 584.5 W |
| Typical heat dissipation | 1896.4 BTU/hour |
| Weight | 11.0 kg (24.26 lb) |
| Ambient temperature | Long terms: 0 °C to 45 °C (32°F to 113°F) ; Short terms: -5 °C to 55 °C (23°F to 131°F) |
Related products
Reviews
There are no reviews yet.