$0.00 Original price was: $0.00.Current price is: $0.00.
2-Port 100GBase-CFP2 Flexible Card(BP481)
2-Port 100GBase-CFP2 Flexible Card(BP481)
| Product | Motherboard | Minimum Version Requirement for Flexible Card |
| ME60–X8 | Flexible Card Broadband Service Unit(BSUF-481,2 sub-slots) | V800R011C00 |
| ME60–X16 | Flexible Card Broadband Service Unit(BSUF-481,2 sub-slots) | V800R011C00 |
| ME60–X8A |
Flexible Card Broadband Service Unit(BSUF-481,2 sub-slots) |
V800R011C00 |
| ME60–X16A |
Flexible Card Broadband Service Unit(BSUF-481,2 sub-slots) |
V800R011C00 |
| Item | ME0D00E2NC78 |
| Line-Rate capability | Provides two 100GE interfaces for line-rate transmitting and receiving. |
| Whether breakout is supported |
No |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks |
Not support interfaces split and the optical module that needs to be enabled with FEC is not supported.This subcard equipped with an ACACIA colored optical module (BOM number: 34061519) has no special precautions when installed on an X8A or X16A device. When installed on an X8 or X16 device, the maximum temperature of the device is limited to 40°C. |
| Optical type supported |
100Gbps CFP2 optical module
NOTE:
When optical modules with the BOM number 02311LYG are used, 2x40G breakout optical fibers are not supported. Modules with the BOM number 02312AXE are not supported. |
| Working mode | Full-duplex |
| Compliant standard | IEEE 802.3 |
| Frame format | Ethernet_II, Ethernet_SAP and Ethernet_SNAP |
| Dimensions (H x W x D) | 37.2 mm x 178.7 mm x 193.3 mm (1.46 in. x 7.04 in. x 7.61 in.) |
| Typical power consumption | 64.8 W |
| Typical heat dissipation | 210.2 BTU/hour |
| Weight | 1.1 kg (2.43 lb) |
| Ambient temperature | Long terms: 0 °C to 45 °C (32°F to 113°F) ; Short terms: -5 °C to 55 °C (23°F to 131°F) |
| Weight | 1.7000 kg |
|---|---|
| Dimensions | 36.5000 × 31.0000 × 10.0000 cm |
| ME60 BRAS |
| Item | ME0D00E2NC78 |
| Line-Rate capability | Provides two 100GE interfaces for line-rate transmitting and receiving. |
| Whether breakout is supported |
No |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks |
Not support interfaces split and the optical module that needs to be enabled with FEC is not supported.This subcard equipped with an ACACIA colored optical module (BOM number: 34061519) has no special precautions when installed on an X8A or X16A device. When installed on an X8 or X16 device, the maximum temperature of the device is limited to 40°C. |
| Optical type supported |
100Gbps CFP2 optical module
NOTE:
When optical modules with the BOM number 02311LYG are used, 2x40G breakout optical fibers are not supported. Modules with the BOM number 02312AXE are not supported. |
| Working mode | Full-duplex |
| Compliant standard | IEEE 802.3 |
| Frame format | Ethernet_II, Ethernet_SAP and Ethernet_SNAP |
| Dimensions (H x W x D) | 37.2 mm x 178.7 mm x 193.3 mm (1.46 in. x 7.04 in. x 7.61 in.) |
| Typical power consumption | 64.8 W |
| Typical heat dissipation | 210.2 BTU/hour |
| Weight | 1.1 kg (2.43 lb) |
| Ambient temperature | Long terms: 0 °C to 45 °C (32°F to 113°F) ; Short terms: -5 °C to 55 °C (23°F to 131°F) |
.svg)
.svg)
Alan –
It is the best effective device I bought so far, I will keep working with telecomate.com.
Chris –
I highly recommend it! It has been functioning flawlessly.
Ann –
The salesperson explained the problem very carefully, and the experience was super strong